Skip to content
Sale!

USK Submersible Water Pump 0.5HP 3SDM214

Original price was: KSh 12,000.00.Current price is: KSh 8,750.00.

  • Submersible Design: The entire pump (motor and pump end) is designed to be fully immersed in the water within the borehole. This ensures quiet operation, eliminates priming issues, and is efficient for deep water extraction.
  • 0.5HP (Horsepower): This is the motor’s power output, approximately 370 Watts (0.37 kW). For a 3-inch submersible pump with 14 impellers, this horsepower focuses on maximizing head rather than flow rate. It’s an entry-level power suitable for domestic water supply from deeper narrow boreholes.
  • Voltage: Single-phase 220V/230V AC (50Hz), compatible with standard household electricity in Kenya.
  • Maximum Head (Vertical Lift): Due to the 14 impellers, a 0.5HP 3SDM214 pump typically has a very good maximum head, often in the range of 80 to 90 meters. This makes it suitable for lifting water from significantly deep, narrow boreholes.
  • Rated Flow Rate: As mentioned, around 2 (2000 liters per hour or 33 liters per minute) at its optimal operating head. The flow rate will decrease as the operating depth increases.
Fast delivery across Kenya.
Nairobi: 1-2 working days. Countrywide: 1-5 working days. Order by phone/WhatsApp: 0797 720290
  • Walk-in Shop in Nairobi
  • Warranty Support
  • Secure Checkout
  • Responsive Support
We accept:M-PESACash on delivery (Nairobi)Visa (in shop)Mastercard (in shop)
Order on WhatsApp
SKU: TTM-00027 Category: Tag: Brand:

Description

Understanding the Model (3SDM214):

  • 3SDM: This is the crucial part of the model code:
    • 3: Refers to the pump’s diameter. It’s designed to fit into a 3-inch (approximately 75mm) borehole casing (or larger). This is a significant distinction from the more common 4-inch pumps, making it suitable for older or narrower boreholes.
    • SDM: Indicates it’s a Submersible Deep well Multistage pump. It has multiple impellers (stages) to build up pressure and lift water from considerable depths. “SDM” often implies stainless steel construction for the motor and pump casing.
  • 2: This number typically indicates the approximate flow rate in cubic meters per hour () at a specific head, or it might refer to a flow series. So, a nominal flow rate around 2 (2000 liters per hour or approximately 33 liters per minute) is expected.
  • 14: This refers to the number of impellers (stages) in the pump. With 14 impellers, this pump is designed to generate a relatively high head (pressure) for its horsepower, allowing it to lift water from significant depths even with a 0.5HP motor.

USK Submersible Water Pump 0.5HP 3SDM214 Key Features and Performance:

  • Submersible Design: The entire pump (motor and pump end) is designed to be fully immersed in the water within the borehole. This ensures quiet operation, eliminates priming issues, and is efficient for deep water extraction.
  • 0.5HP (Horsepower): This is the motor’s power output, approximately 370 Watts (0.37 kW). For a 3-inch submersible pump with 14 impellers, this horsepower focuses on maximizing head rather than flow rate. It’s an entry-level power suitable for domestic water supply from deeper narrow boreholes.
  • Voltage: Single-phase 220V/230V AC (50Hz), compatible with standard household electricity in Kenya.
  • Maximum Head (Vertical Lift): Due to the 14 impellers, a 0.5HP 3SDM214 pump typically has a very good maximum head, often in the range of 80 to 90 meters. This makes it suitable for lifting water from significantly deep, narrow boreholes.
  • Rated Flow Rate: As mentioned, around 2 (2000 liters per hour or 33 liters per minute) at its optimal operating head. The flow rate will decrease as the operating depth increases.
  • Construction:
    • Body: Usually stainless steel (AISI 304 grade) for corrosion resistance.
    • Impellers/Diffusers: Often made from high-strength thermoplastic (like Noryl or POM) or stainless steel, designed for durability.
    • Motor: Hermetically sealed.
    • Built-in Check Valve: Often included to prevent backflow.
    • Control Box: Comes with a separate control box for capacitor and thermal overload protection.
  • Minimum Well Diameter: Crucially, it requires a borehole with a minimum diameter of 3 inches (75mm) to fit.
  • Cable Length: Typically supplied with a standard submersible cable length (e.g., 30-50 meters).
  • Sand Content: Designed for clean water or water with very low sand content (e.g., max 0.25% by weight).

Additional information

Weight 5 kg
How soon can I get this delivered?

Orders confirmed before 3:00pm on a working day are dispatched the same day. Nairobi and its environs then take 1 to 2 working days, major towns 1 to 3, and other areas 2 to 5. See our Shipping & Delivery Policy, or confirm timing at checkout or by calling us.

How do I pay?

Online orders are paid by M-PESA, or by cash on delivery for eligible orders in Nairobi and its environs. Visa and Mastercard are accepted in person at our Nairobi shop only. See our Payment Methods page.

Is this product covered by warranty?

Branded items are sold as supplied by the manufacturer or its distributor, and unbranded items are listed without a brand name. We pass on the manufacturer warranty that comes with the item. As a guide, most power tools carry six to twelve months and many generators and solar products carry twelve months or more; the exact period is shown on the product page or in the papers in the box. See our Warranty Policy.

Can I return it if there is a problem?

You may request a return within 14 days of delivery, on both faulty and non-faulty items, and we accept exchanges. See our Return & Refund Policy for details.

How do I get help before buying?

Call or WhatsApp us and our team will help you choose the right tool for the job. 0797 720290

Reviews

There are no reviews yet.

Be the first to review “USK Submersible Water Pump 0.5HP 3SDM214”

Your email address will not be published. Required fields are marked *

Recently Viewed